M waldi workbench kuma aka sani da 3 D m waldi workbench, 3 D waldi tebur, 3 D waldi farantin, 3 D m waldi farantin, m waldi tebur. Samfurin yana da sassauƙa sosai kuma yana iya jure babban ƙarfin nauyi. Dukkan bangarorin biyar ana sarrafa su da ramuka na yau da kullun kuma an zana su da layukan grid.(Ba wani gangare da tsagi mai siffar T). A kan farantin mai sassauƙa na 3D, kowane kayan aiki za a iya sanya shi kuma a manne shi ta hanyoyi daban-daban ta hanyar sanya fil ɗin matsa (Pin PC / kulle pin). Wannan fil ɗin PC an ƙera shi na musamman. Za'a iya haɗa wuraren aiki da yawa na 3D kai tsaye tare a ɗaya daga cikin bangarorin biyar. Wannan tsarin na yau da kullun ya ƙunshi ayyuka na duniya wajen girkawa, daidaitawa, da matse kayan aiki. Its abũbuwan amfãni suna musamman nuna a cikin aikace-aikace na manyan workpieces. A lokacin taro ko waldi, da sassauƙan walda kayan aikin amfani da saka tubalan, dangane tubalan, kayan aiki, da kuma goyon bayan tubalan gano wuri da workpiece da kuma rike shi da tabbaci ga kowane sakawa batu ko sakawa surface. A cikin aikin walda na benci mai sassauƙa na walda, yi amfani da ruwa mai ƙima mai rahusa kawai don guje wa saman walda. Dandalin gwaji ya tsufa. Ta hanyar sauye-sauye na ƙirar ƙira, haɗaɗɗen haɗaɗɗen haɗaɗɗen haɗakarwa za a iya kammala su cikin ɗan gajeren lokaci. Yana da matukar tattalin arziki ko don yin sashi ɗaya ko a haɗa shi. Ramin grid akan saman benci na aikiKuma ramukan raga akan kowane nau'in suna samun daidaitattun shirye-shiryen bidiyo da za'a iya maimaita su. Na farko, saitin ingantattun ma'auni ne, na tsari da na duniya. Ana haɗa dukkan nau'ikan kayayyaki, ƙayyadaddun kuma an ƙarfafa su ta hanyar ɗora ramuka da makullai. Za a iya maye gurbin na'urar bisa ga girman aikin aikin. Ta hanyar gyare-gyare, za a iya haɗa dukkan kayan aiki a cikin sarari mai girma uku. Halayen wannan saitin kayan aiki sune: galibi ana amfani da su don walda, don haka ana kiran shi dandamalin walda mai sassauƙa na 3D da kuma kayan walda masu sassauƙa. Wannan manne ya kasu kashi biyu:
1) An raba silsilar zuwa jeri biyu: D16 da D28;
2) Dangane da kayan, an raba shi zuwa: sassan karfe 3 D dandamali mai sassauƙa da simintin 3 D mai sassauƙa;
Yana da tushe na asali na 3 D kayan aiki mai sassaucin ra'ayi, kuma aikinsa shine don tallafawa aikin da aka sarrafa da kayan aiki na matsayi, matsi mai mahimmanci, daidaitawa da kayan aikin magani, da dai sauransu.
Ramin nisa na jerin dandamali na D28 shine 100mm, duk dandamali suna kwarzana tare da layukan grid masu dacewa, kuma an zana layin grid 100 × 100 akan saman tebur ɗin shigarwa na workpiece don sauƙaƙe dubawa na gani na workpiece.
Ramin rami na jerin dandamali na D16 shine 50mm, tare da layin grid daidai da aka zana akan dandamali, da layin grid 50 × 50 wanda aka zana akan farfajiyar shigarwa na workpiece na teburin don sauƙaƙe dubawar gani na workpiece.
Dangane da buƙatun abokin ciniki, ana iya nuna teburin ma'aunin sikelin millimeter a gefen dama na dandamali a cikin nau'in ramin grid. Girman dandamali ya kai 6000x2200mm, kuma ana iya daidaita shi bisa ga ainihin bukatun. Ba wai kawai za a iya amfani da shi azaman dandalin walda ba, har ma a matsayin dandalin taro, dandalin gwaji, dandamalin sarrafa kayan aikin injin, da dai sauransu.
| Mai iya daidaitawa a kowane girman |
| Ƙayyadewa (L x W x H) |
| 1000×1000×200mm | 1500×1500×200mm |
| 1000×1500×200mm | 1500×2000×200mm |
| 1000×2000×200mm | 1500×3000×200mm |
| 1000×2500×200mm | 1200×2400×200mm |
| 1200×1200×200mm | 2000×3000×200mm |
| 1200×2400×200mm | 2000×4000×200mm |
| Material: a, HT 30 O simintin gyare-gyare, b, Q355 karfe farantin waldi, c, high taurin karfe farantin waldi, d, bakin karfe farantin waldi |
| Girman Pore: A=φ28.065-φ28.149mm. |
| Nisa rami: L1=100±0.05mm. |
| Yanke layi: Tazarar layi W1=100 ± 0.05mm. |
| Tsari: 0.1 / 1000mm. |
| A tsaye: 0.1 / 200mm. |
| Zazzage saman: Ra 3.2. |
| Ƙarfin ɗauka: daidaitaccen nau'in 2T, nau'in firam: 5T. |
| Taurin: taurin jikin abu, taurin nitrous Layer: HV 450-HV 630 |
Samfuran kayan aikin walda masu sassaucin ra'ayi suna da alaƙa da: araha, hadaddun da tsada kayan aikin gargajiya ya zama baya. Kuna iya guje wa babban farashi na babban kayan aikin kayan aiki, saboda tsarin 3 D baya buƙatar gyara don ɗaukar wuraren aiki iri-iri. Irin waɗannan na'urori sun dace sosai don aiki.
